Cooling Manifold Supply
Cooling Manifold Return
Cooling Water Flow Manifold
Water flow manifold components are furnished pre-assembled on a frame for ease of installation: supplied with air-actuated solenoid valves and angle valves, flow meter with digital read-out, pressure relief valve, strainer and reliable flow indicators. Used in conjunction with our controls, the customer has available several heating/cooling patterns to suit the process, resulting in optimized reaction times.
Hitech™ cooling water flow manifold components are:
- 3 independent flow channels for Inlet Flange, Cooling Chamber and Exit Lip
- made of corrosion resistant materials
- shipped pre-assembled
- includes j-boxes and cables for inter-wiring by customer with the supplied controls
- hydrostatically tested to prevent leaks
- equipped with sight flow indicators (offering a visual means of assuring water flow) protected for back flow by check valves
- protected by water strainer
- protected from steam build-up by a relief valve
- operated by solenoid valves (air) (24 VCD/110 VAC/ 240 VAC)
- solenoid valves protected by supplied air filter
- air operated WATER flow valves
- flow monitored via flow meter with output relay interlocked with the controls for alarm in a NO FLOW (no cooling or low cooling) condition
- optional metering valves for custom applications
- alternative cooling water system circuit available for installation where frequent accidental power shut off are expected